Hostacom 515-UV BLK high melt flow, 2,100 MPa flexural modulus, UV-stabilized, 15% talc-filled polypropylene copolymer has a balance of properties. It is typically used for automotive interior trim applications. This material processes very well and provides parts with outstanding surface appearance.
Hostacom 515-UV BLK
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 30 g/10 min |
| Density (23 °C, Method A) | 1.00 g/cm³ |
| Flexural Modulus (23 °C) | 2100 MPa |
| Tensile Stress at Yield (23 °C) | 26 MPa |
| Notched Izod Impact Strength (23 °C) | 5.0 kJ/m² |
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 115 °C |
| Deflection Temperature Under Load (1.80 MPa, Unannealed) | 60 °C |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Automotive Parts, Interior Automotive Applications
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications